How to maintain the electroplating equipment production line?

At present, an efficient and fast electroplating equipment can simultaneously electroplate multiple workpieces. During the electroplating process, stirring the liquid medium can accelerate the electroplating of the workpiece. Stirring the electroplating liquid medium filters impurities from the electroplating box, always adhering to the purity and quality of electroplating, greatly improving electroplating efficiency, and providing efficient and fast electroplating equipment.

Including an electroplating box, impurity filter, and mixer, the electroplating box is placed on a frame, the top of the electroplating box cover is sealed, and multiple negative poles and electroplating parts are set on the top of the electroplating box cover. The negative poles and electroplating parts enter the electroplating box at the bottom, and the electroplating box is filled with electroplating liquid medium. The negative poles and electroplating parts are immersed in the liquid at the bottom, and a row of mixers are set at the bottom of the electroplating box. The blades of the mixer are partially immersed in the liquid medium, and the driving part is fixed on the frame. One end of the electroplating box is equipped with a straw, and a one-way valve is installed at the connection between the electroplating box and the straw. The other end of the straw is connected to the lower end of the impurity filter, and the upper end of the impurity filter is connected to the suction pump. The output end of the suction pump is connected to the electroplating box through an exhaust pipe, and the impurity filter and suction pump are placed on the pump support seat.

If the equipment is planned to be shut down for a long time, maintenance should be carried out to prevent erosion and aging during the shutdown process. Do: Clean the ground, clean the water on the ground, keep the ground dry, and keep the machines, troughs, drivers, and pendants clean and dry; All motors are protected with cling paper, all bearings are injected with lubricating grease for rust prevention, all pipelines are cleaned with chemicals, filter elements are cleaned, all heaters are cleaned, dirt is removed, and kept dry.

Electroplating equipment is used in the production of printed circuit boards. Due to different production processes and manufacturers, the equipment may have certain differences, so the maintenance methods may vary. However, it is necessary to maintain the equipment in a timely and correct manner to catch up with the production schedule, ignore equipment maintenance, and only maintain it correctly and timely to ensure the normal operation and stable performance of the equipment, and ensure production and quality.