How do electroplating equipment manufacturers maintain their equipment?

If the equipment is planned to be shut down for a long time, maintenance should be carried out to prevent erosion and aging during the shutdown process. The ground should be cleaned, the water on the ground should be cleaned, the ground should be kept dry, and the machine, tank, driving, and hanging parts should be kept clean and dry; All motors are protected with cling paper; All bearings are injected with lubricating grease for rust prevention; Clean all the chemicals inside the pipelines thoroughly; Remove the filter element, clean all heaters in the tank, remove dirt, and keep them dry.

Efficient and fast electroplating equipment can simultaneously electroplate multiple workpieces. In addition, stirring the liquid medium during the electroplating process can accelerate the electroplating of the workpiece. At the same time, stirring the electroplating can filter out impurities from the liquid medium in the electroplating box, always adhering to the purity and quality of electroplating, greatly improving the efficiency of electroplating. The efficient and fast electroplating equipment includes an electroplating box, impurity filter, and agitator. The electroplating box is placed on the rack, and the electroplating box cover is placed at the top.

At the contact point, multiple negative poles and workpieces are sealed, and the upper end of the electroplating box cover is equipped with multiple negative poles and workpieces. The lower ends of the negative poles and workpieces extend to the electroplating box, which is filled with electroplating liquid medium. The lower ends of the negative poles and workpieces are immersed in the liquid. A row of agitators is set at the lower end of the electroplating box, and the blade part of the agitator is in the liquid medium. The driving part is fixed on the frame, and one end of the electroplating box is equipped with a suction pipe.