Product Introduction

Electroplating is a process that uses point solution method to process the surface of parts. During electroplating, the parts are treated as anodes, and metal ions in the plating solution deposit on the surface of the parts under the action of direct current to form a uniform and dense metal coating. The electroplating process equipment is the production process carried out in the electroplating workshop, which can be divided into three stages: pre plating surface treatment, electroplating treatment, and post plating treatment. Electroplating process equipment generally refers to the production equipment that directly processes the parts. The main processes of pre plating surface treatment include polishing, polishing, brushing, rolling, sandblasting, degreasing, rust removal, corrosion, neutralization, and cleaning.

The equipment used in the electroplating process mainly includes various types of fixed slots, rolling plating slots, hanging fixtures, hanging baskets, etc. Post plating treatment is the process of polishing, polishing, passivating, coloring, drying, sealing, and dehydrogenation of parts. The gantry style hanging plating production line selects one or more processes as needed to ensure that the parts meet quality requirements. The commonly used equipment for post plating treatment includes grinding and polishing machines, as well as various types of fixed grooves.

Product parameters

1. There should be good adhesion between the coating and the base metal, as well as between the coatings.

2. The coating should be finely crystallized, and the hanging plating production line should be developed to be smooth and uniform in thickness.

3. The coating should have the specified thickness and as few pores as possible.

4. The coating should have specified indicators such as brightness, hardness, conductivity, etc.

5. The ambient temperature ranges from -10 ℃ to 60 ℃;

6. The input voltage is 220V ± 22V or 380V ± 38V;

7. The maximum working noise of water treatment equipment should not exceed 80dB (A).

8. The relative humidity (RH) should not exceed 95%;

9. The COD content of raw water is between 100mg/L and 150000mg/L.

10. The electroplating time and temperature during the electroplating process determine the thickness of the coating.